International
Tables for Crystallography Volume C Mathematical, physical and chemical tables Edited by E. Prince © International Union of Crystallography 2006 |
International Tables for Crystallography (2006). Vol. C. ch. 7.4, pp. 655-656
Section 7.4.2.2.2. Calculation of α
B. T. M. Willisd
|
Inserting (7.4.2.8) into (7.4.2.6) gives the TDS correction factor as where Tmn, an element of a 3 × 3 symmetric matrix T, is defined by Equation (7.4.2.9) can also be written in the matrix form with representing the transpose of H.
The components of H relate to orthonormal axes, whereas it is more convenient to express them in terms of Miller indices hkl and the axes of the reciprocal lattice. If S is the 3 × 3 matrix that transforms the scattering vector H from orthonormal axes to reciprocal-lattice axes, then where hT = (h, k, l) . The final expression for α, from (7.4.2.11) and (7.4.2.12), is This is the basic formula for the TDS correction factor.
We have assumed that the entire one-phonon TDS under the Bragg peak contributes to the measured integrated intensity, whereas some of it is removed in the background subtraction. This portion can be calculated by taking the range of integration in (7.4.2.10) as that corresponding to the region of reciprocal space covered in the background measurement.
To evaluate T requires the integration of the function A−1 over the scanned region in reciprocal space (see Fig. 7.4.2.2). Both the function itself and the scanned region are anisotropic about the reciprocal-lattice point, and so the TDS correction is anisotropic too, i.e. it depends on the direction of the diffraction vector as well as on .
Computer programs for calculating the anisotropic TDS correction for crystals of any symmetry have been written by Rouse & Cooper (1969), Stevens (1974), Merisalo & Kurittu (1978), Helmholdt, Braam & Vos (1983), and Sakata, Stevenson & Harada (1983). To simplify the calculation, further approximations can be made, either by removing the anisotropy associated with A−1 or that associated with the scanned region. In the first case, the element Tmn is expressed as where the angle brackets indicate the average value over all directions. In the second case, where is the radius of the sphere that replaces the anisotropic region (Fig. 7.4.2.2) actually scanned in the experiment, and dS is a surface element of this sphere. qm can be estimated by equating the volume of the sphere to the volume swept out in the scan.
If both approximations are employed, the correction factor is isotropic and reduces to with vL representing the mean velocity of the elastic waves, averaged over all directions of propagation and of polarization.
Experimental values of α have been measured for several crystals by γ-ray diffraction of Mössbauer radiation (Krec & Steiner, 1984). In general, there is good agreement between these values and those calculated by the numerical methods, which take into account anisotropy of the TDS. The correction factors calculated analytically from (7.4.2.14) are less satisfactory.
The principal effect of not correcting for TDS is to underestimate the values of the atomic displacement parameters. Writing , we see from (7.4.2.14) that the overall displacement factor is increased from B to B + ΔB when the correction is made. ΔB is given by Typically, ΔB/B is 10–20%. Smaller errors occur in other parameters, but, for accurate studies of charge densities or bonding effects, a TDS correction of all integrated intensities is advisable (Helmholdt & Vos, 1977; Stevenson & Harada, 1983).
References
Helmholdt, R. B., Braam, A. W. M. & Vos, A. (1983). Improved corrections for thermal diffuse scattering. Acta Cryst. A39, 90–94.Google ScholarHelmholdt, R. B. & Vos, A. (1977). Errors in atomic parameters and electron density distributions due to thermal diffuse scattering of X-rays. Acta Cryst. A33, 38–45.Google Scholar
Krec, K. & Steiner, W. (1984). Investigation of a silicon single crystal by means of the diffraction of Mössbauer radiation. Acta Cryst. A40, 459–465.Google Scholar
Merisalo, M. & Kurittu, J. (1978). Correction of integrated Bragg intensities for anisotropic thermal scattering. J. Appl. Cryst. 11, 179–183.Google Scholar
Rouse, K. D. & Cooper, M. J. (1969). The correction of measured integrated Bragg intensities for anisotropic thermal diffuse scattering. Acta Cryst. A25, 615–621.Google Scholar
Sakata, M., Stevenson, A. W. & Harada, J. (1983). G-TDSCOR: one-phonon TDS corrections for measured integrated Bragg intensities. J. Appl. Cryst. 16, 154–156.Google Scholar
Stevens, E. D. (1974). Thermal diffuse scattering corrections for single-crystal integrated intensity measurements. Acta Cryst. A30, 184–189.Google Scholar
Stevenson, A. W. & Harada, J. (1983). The consequences of the neglect of TDS correction for temperature parameters. Acta Cryst. A39, 202–207.Google Scholar