modify your search
 Results for DC.creator="M." AND DC.creator="Birkholz" in section 5.4.2 of volume H
Phase inhomogeneities
Birkholz, M.  International Tables for Crystallography (2019). Vol. H, Section 5.4.2.4, p. 584 [ doi:10.1107/97809553602060000969 ]
... coefficient of phase mixtures is the sum over the [mu]m coefficients of all phases weighted by their weight fraction, The ...

Determination and interpretation of the product [mu]t
Birkholz, M.  International Tables for Crystallography (2019). Vol. H, Section 5.4.2.3, pp. 583-584 [ doi:10.1107/97809553602060000969 ]
... that systematic errors may stem from both [rho] and [mu]m. Possible errors in density (the term [rho]bulk is often ... deviations. For example, the quantity ([mu]t)exp/([rho][mu]m) can be denoted the projected thickness, tpro, since it represents ... the free volume of the layer. References Apel, D., Klaus, M., Genzel, C. & Balzar, D. (2011). Rietveld refinement of ...

Chemical phase identification
Birkholz, M.  International Tables for Crystallography (2019). Vol. H, Section 5.4.2.2, pp. 582-583 [ doi:10.1107/97809553602060000969 ]
... International Tables for Crystallography) specify the mass absorption coefficient [mu]m, which is derived by dividing [mu] by the mass density ... the physical causes of attenuation or absorption, the coefficient [mu]m is advantageously further reduced to a cross section [sigma] that ... The normalization is achieved by multiplying by the atomic mass M and dividing by Avogadro's number NA, leading to ...

Absorption factor
Birkholz, M.  International Tables for Crystallography (2019). Vol. H, Section 5.4.2.1, pp. 581-582 [ doi:10.1107/97809553602060000969 ]
... Lorentz-polarization factor Lp, the structure factor F, the multiplicity m, the texture factor Th etc. as outlined in previous chapters ... wavelengths, corresponding to penetration depths of between 0.1 and 10m. Since these values are in the range of typical layer ... for thin Al and Nb films of 500nm and 1m thickness measured with Cu K[alpha] radiation, where use ...

Effects of absorption
Birkholz, M.  International Tables for Crystallography (2019). Vol. H, Section 5.4.2, p. 581 [ doi:10.1107/97809553602060000969 ]
... Lorentz-polarization factor Lp, the structure factor F, the multiplicity m, the texture factor Th etc. as outlined in previous chapters ... wavelengths, corresponding to penetration depths of between 0.1 and 10m. Since these values are in the range of typical layer ... for thin Al and Nb films of 500nm and 1m thickness measured with Cu K[alpha] radiation, where use ...

powered by swish-e
























































to end of page
to top of page