modify your search
 Results for DC.creator="S." AND DC.creator="M." AND DC.creator="Gruner" in section 7.2.3 of volume F
Modular images
Tate, M. W., Eikenberry, E. F. and Gruner, S. M.  International Tables for Crystallography (2012). Vol. F, Section 7.2.3.6, p. 186 [ doi:10.1107/97809553602060000821 ]
Modular images 7.2.3.6. Modular images The size of available fibre optics and CCDs and the inefficiencies of image reduction limit the practical imaging area of a single CCD system. Closely stacked fibre-optic taper CCD modules can be used to cover a larger area. Although the image recorded from each module ...

Obliquity correction
Tate, M. W., Eikenberry, E. F. and Gruner, S. M.  International Tables for Crystallography (2012). Vol. F, Section 7.2.3.5, p. 186 [ doi:10.1107/97809553602060000821 ]
... like a uniform illumination. Measurement for one detector showed 75m spots could be measured to 1% accuracy, whereas 300m spots could be measured to 0.3% accuracy (Tate et al., 1995). References Tate, M. W., Eikenberry, E. F., Barna, S. L., Wall, M. ...

Flat-field corrections
Tate, M. W., Eikenberry, E. F. and Gruner, S. M.  International Tables for Crystallography (2012). Vol. F, Section 7.2.3.4, pp. 185-186 [ doi:10.1107/97809553602060000821 ]
... nature of the light scatter. These effects are discussed in Gruner et al. (1993). Consider a given phosphor layer with ... using factors derived from the wrong X-ray energy. References Gruner, S. M., Barna, S. L., Wall, M. E., Tate, M. ...

Calibration and correction
Tate, M. W., Eikenberry, E. F. and Gruner, S. M.  International Tables for Crystallography (2012). Vol. F, Section 7.2.3, pp. 184-186 [ doi:10.1107/97809553602060000821 ]
... holes with a flood field of X-rays. Holes 75m in diameter spaced on a 11mm square grid are ... fabricated in an X-ray opaque material, such as 50m tungsten foil (Barna et al., 1999). Given an image ... nature of the light scatter. These effects are discussed in Gruner et al. (1993). Consider a given phosphor layer ...

Removal of radioactive decay events
Tate, M. W., Eikenberry, E. F. and Gruner, S. M.  International Tables for Crystallography (2012). Vol. F, Section 7.2.3.2, p. 185 [ doi:10.1107/97809553602060000821 ]
... spurious events (see Barna et al., 1999). References Barna, S. L., Tate, M. W., Gruner, S. M. & Eikenberry, E. F. (1999). Calibration procedures ...

Dark-current subtraction
Tate, M. W., Eikenberry, E. F. and Gruner, S. M.  International Tables for Crystallography (2012). Vol. F, Section 7.2.3.1, p. 185 [ doi:10.1107/97809553602060000821 ]
Dark-current subtraction 7.2.3.1. Dark-current subtraction It is important to remove both the electronic offset and the accumulated dark charge from an X-ray image. Since the integrated dark current varies from pixel to pixel and with time, a set of images needs to be taken (with no X-rays ...

Geometric distortion
Tate, M. W., Eikenberry, E. F. and Gruner, S. M.  International Tables for Crystallography (2012). Vol. F, Section 7.2.3.3, p. 185 [ doi:10.1107/97809553602060000821 ]
... holes with a flood field of X-rays. Holes 75m in diameter spaced on a 11mm square grid are ... fabricated in an X-ray opaque material, such as 50m tungsten foil (Barna et al., 1999). Given an image ... must be included in the flat-field calibration. References Barna, S. L., Tate, M. W., Gruner, S. M. & Eikenberry, E. ...

powered by swish-e
























































to end of page
to top of page