1 International Union of Crystallography 1o4 2006 2006 1-4020-0714-0 http://xrpp.iucr.org/cgi-bin/itr?url_ver=Z39.88-2003&rft_dat=what%3Dchapter%26volid%3DDa%26chnumo%3D1o4%26chvers%3Dv0001 /Local/Ix86/Linux/ITGEN/httpd_axkit/htdocs/Da/ch1o4v0001 10.1107/97809553602060000631 dapart1 Tensorial aspects of physical properties Dach1o4 Thermal expansion /Local/Ix86/Linux/ITGEN/httpd_axkit/htdocs/Da/ch1o5v0001/ http://dx.doi.org/openurl?url_ver=Z39.88-2003&rfr_id=ori:rid:iucr.org&rft_id=doi:10.1107/97809553602060000631&rfr_dat=cr%5FsetVer%3D01%26cr%5Fpub%3D10%2E1107%26cr%5Fwork%3DThermal%20expansion%26cr%5Fsrc%3D10%2E1107%26cr%5FsrvTyp%3Dhtml http://dx.doi.org/openurl?url_ver=Z39.88-2003&rfr_id=ori:rid:iucr.org&rft_id=doi:10.1107/97809553602060000631&rfr_dat=cr%5FsetVer%3D01%26cr%5Fpub%3D10%2E1107%26cr%5Fwork%3DThermal%20expansion%26cr%5Fsrc%3D10%2E1107%26cr%5FsrvTyp%3Dpdf Thermal expansion http://xrpp.iucr.org/cgi-bin/itr?url_ver=Z39.88-2003&rft_dat=what%3Dchapter%26volid%3DDa%26chnumo%3D1o4%26chvers%3Dv0001&rfr_id=ori:rid:iucr.org&rft_id=doi:10.1107/97809553602060000631&rfr_dat=cr%5FsetVer%3D01%26cr%5Fpub%3D10%2E1107%26cr%5Fwork%3DThermal%20expansion%26cr%5Fsrc%3D10%2E1107%26cr%5FsrvTyp%3Dhtml Da 99 International Tables for Crystallography /Local/Ix86/Linux/ITGEN/httpd_axkit/htdocs/Da/ch1o3v0001/ International Tables for Crystallography Volume D http://dx.doi.org/openurl?url_ver=Z39.88-2003&rfr_id=ori:rid:springer.com&rft_id=doi:10.1107/97809553602060000631&rfr_dat=cr%5FsetVer%3D01%26cr%5Fpub%3D10%2E1107%26cr%5Fwork%3DThermal%20expansion%26cr%5Fsrc%3D10%2E1007%26cr%5FsrvTyp%3Dhtml A. Authier 1.4 /Da/ch1o3v0001/ 104 Thermal expansion Grüneisen relation; acoustic branches; anharmonicity; capacitance method; interferometry; pushrod dilatometry; thermal expansion D http://dx.doi.org/openurl?url_ver=Z39.88-2003&rfr_id=ori:rid:springer.com&rft_id=doi:10.1107/97809553602060000631&rfr_dat=cr%5FsetVer%3D01%26cr%5Fpub%3D10%2E1107%26cr%5Fwork%3DThermal%20expansion%26cr%5Fsrc%3D10%2E1007%26cr%5FsrvTyp%3Dpdf a 1-4020-5409-2 /Da/ch1o5v0001/ v0001 /Da/ch1o4v0001/ Physical properties of crystals A A1 B C D E F G

H. Küppers^a ^*

^aInstitut für Geowissenshaften, Universität Kiel, Olshausenstrasse 40, D-24098 Kiel, Germany
Correspondence e-mail: kueppers@min.uni-kiel.de

H. Küppers DC%2Ecreator%3D%22H%2E%22%20AND%20DC%2Ecreator%3D%22K%FCppers%22 H. Küppers kueppers@min.uni-kiel.de ^aInstitut für Geowissenshaften, Universität Kiel, Olshausenstrasse 40, D-24098 Kiel, Germany DC%2Ecreator%3D%22H%2E%22%20AND%20DC%2Ecreator%3D%22K%FCppers%22 H. Küppers

This chapter discusses the reduction in the number of independent tensor components by crystal symmetry, representation surfaces, the quasiharmonic approximation and the Grüneisen relation. Experimental methods including diffraction, optical and electrical methods are presented. Finally, the relation between thermal expansion and crystal structure is discussed.

1.4.1. Definition, symmetry and representation surfaces

| top | pdf |

Definition, symmetry and representation surfaces

If the temperature T of a solid is raised by an amount ΔT, a deformation takes place that is described by the strain tensorstrain tensor $[u_{ij}]$ : $[u_{ij} = \alpha_{ij} \Delta T. \eqno(1.4.1.1)]$ The quantities $[\alpha_{ij}]$ are the coefficients of thermal expansionthermal expansion. They have dimensions of $[T^{-1}]$ and are usually given in units of $[10^{-6}\;\hbox{K}^{-1}]$ . Since $[u_{ij}]$ is a symmetrical polar tensor of second rank and T is a scalar, $[\alpha_{ij}]$ is a symmetrical polar tensor of second rank $[(\alpha_{ij} = \alpha_{ji})]$ . According to the properties of the strain tensorstrain tensor $[u_{ij}]$ (cf. Section Elastic propertiesA. AuthierA. Zarembowitch1.3.1.3.2 ), the `volume thermal expansionthermal expansionvolume', β, is given by the (invariant) trace of the `linear' coefficients $[\alpha_{ij}]$ . $[\beta = {1 \over V} {\Delta V \over \Delta T} = \alpha_{11} + \alpha_{22} + \alpha_{33} = \hbox{trace } (\alpha_{ij}). \eqno(1.4.1.2)]$

The magnitudes of thermal expansion in different directions, $[\alpha'_{11}]$ , can be visualized in the following ways:

(1) The representation quadricrepresentation quadric (cf. Section Introduction to the properties of tensorsA. Authier1.1.3.5.2 ) $[\alpha_{ij}x_{i}x_{j} = C \eqno(1.4.1.3)]$ can be transformed to principal axes $[X_{1}]$ , $[X_{2}]$ and $[X_{3}]$ with principal values $[\alpha_{1}]$ , $[\alpha_{2}]$ and $[\alpha_{3}]$ : $[\alpha_{1}X_{1}^{2} + \alpha_{2}X_{2}^{2} + \alpha_{3}X_{3}^{2} = C.]$

The length of any radius vector leading to the surface of the quadric represents the reciprocal of the square root of thermal expansion along that direction, $[\alpha'_{11} = a_{1i}a_{1j}\alpha_{ij}]$ ( $[a_{kl}]$ are the direction cosines of the particular direction).

If all $[\alpha_{i}]$ are positive, the quadric is represented by an ellipsoid, whose semiaxes have lengths $[1/\sqrt{\alpha_{i}}]$ . In this case, the square of the reciprocal length of radius vector r, $[r^{-2}]$ , represents the amount of positive expansion in the particular direction, i.e. a dilation with increasing temperature. If all $[\alpha_{i}]$ are negative, C is set to −1. Then, the quadric is again an ellipsoid, and $[r^{-2}]$ represents a negative expansion, i.e. a contraction with increasing temperature.

If the $[\alpha_{i}]$ have different signs, the quadric is a hyperboloid. The asymptotic cone represents directions along which no thermal expansion occurs $[(\alpha'_{11} = 0)]$ .

If one of the $[\alpha_{i}]$ is negative, let us first choose . Then, the hyperboloid has one (belt-like) sheet (cf. Fig. Elastic propertiesA. AuthierA. Zarembowitch1.3.1.3 ) and the squares of reciprocal lengths of radius vectors leading to points on this sheet represent positive expansions (dilatations) along the particular directions. Along directions where the hyperboloid has no real values, negative expansions occur. To visualize these, C is set to −1. The resulting hyperboloid has two (cap-like) sheets (cf. Fig. Elastic propertiesA. AuthierA. Zarembowitch1.3.1.3 ) and $[r^{-2}]$ represents the amount of contraction along the particular direction.

If two of the $[\alpha_{i}]$ are negative, the situation is complementary to the previous case.
(2) A crystal sample having spherical shape (radius = 1 at temperature T) will change shape, after a temperature increase ΔT, to an ellipsoid with principal axes $[(1 + \alpha_{1}\Delta T)]$ , $[(1 + \alpha_{2}\Delta T)]$ and $[(1 + \alpha_{3}\Delta T)]$ . This `strain ellipsoidstrain ellipsoid' is represented by the formula $[{X_{1}^{2} \over (1 + \alpha_{1}\Delta T)^{2}} + {X_{2}^{2} \over (1 + \alpha_{2}\Delta T)^{2}} + {X_{3}^{2} \over (1 + \alpha_{3}\Delta T)^{2}} = 1.]$

Whereas the strain quadric (1.4.1.3) may be a real or imaginary ellipsoid or a hyperboloid, the strain ellipsoidstrain ellipsoid is always a real ellipsoid.
(3) The magnitude of thermal expansion in a certain direction (the longitudinal effect), $[\alpha'_{11}]$ , if plotted as radius vector, yields an oval: $[(\alpha_{1}X_{1}^{2} + \alpha_{2}X_{2}^{2} + \alpha_{3}X_{3}^{2})^{2} = (X_{1}^{2} + X_{2}^{2} + X_{3}^{2})^{3}.]$ If spherical coordinates $[(\varphi, \vartheta)]$ are used to specify the direction, the length of r is $[|{\bf r}| = \alpha'_{11} = (\alpha_{1} \cos^{2} \varphi + \alpha_{2} \sin^{2} \varphi) \sin^{2} \vartheta + \alpha_{3} \cos^{2} \vartheta. \eqno(1.4.1.4)]$

Sections through this representation surfacerepresentation surface are called polar diagrams.

The three possible graphical representations are shown in Fig. 1.4.1.1.

The maximum number of independent components of the tensor $[\alpha_{ij}]$ is six (in the triclinic system). With increasing symmetry, this number decreases as described in Chapter Introduction to the properties of tensorsA. Authier1.1 . Accordingly, the directions and lengths of the principal axes of the representation surfacesrepresentation surface are restricted as described in Chapter Elastic propertiesA. AuthierA. Zarembowitch1.3 (e.g. in hexagonal, trigonal and tetragonal crystals, the representation surfacesrepresentation surface are rotational sheets and the rotation axis is parallel to the n-fold axis). The essential results of these symmetry considerations, as deduced in Chapter Introduction to the properties of tensorsA. Authier1.1 and relevant for thermal expansion, are compiled in Table 1.4.1.1.

The coefficients of thermal expansion depend on temperature. Therefore, the directions of the principal axes of the quadrics in triclinic and monoclinic crystals change with temperature (except the principal axis parallel to the twofold axis in monoclinic crystals).

The thermal expansion of a polycrystalline materialpolycrystalline materials can be approximately calculated if the $[\alpha_{ij}]$ tensor of the single crystal is known. Assuming that the grains are small and of comparable size, and that the orientations of the crystallites are randomly distributed, the following average of $[\alpha'_{11}]$ [(1.4.1.4)] can be calculated: $[\bar{\alpha} = {1 \over 4\pi} \int_{0}^{2\pi} \int_{0}^{\pi} \alpha'_{11} \sin \vartheta\ \hbox{d} \vartheta\ \hbox{d} \varphi = {\textstyle{1\over 3}} (\alpha_{1} + \alpha_{2} + \alpha_{3}).]$ If the polycrystal consists of different phases, a similar procedure can be performed if the contribution of each phase is considered with an appropriate weight.

It should be mentioned that the true situation is more complicated. The grain boundaries of anisotropic polycrystalline solidspolycrystalline materials are subject to considerable stresses because the neighbouring grains have different amounts of expansion or contraction. These stresses may cause local plastic deformation and cracks may open up between or within the grains. These phenomena can lead to a hysteresis behaviour when the sample is heated up or cooled down. Of course, in polycrystals of a cubic crystal species, these problems do not occur.

If the polycrystalline samplepolycrystalline materials exhibits a texture, the orientation distribution function (ODF) has to be considered in the averaging process. The resulting overall symmetry of a textured polycrystal is usually $[{\infty \over m}m]$ (see Section Introduction to the properties of tensorsA. Authier1.1.4.7.4.2 ), showing the same tensor form as hexagonal crystals (Table 1.4.1.1), or mmm.

1.4.2. Grüneisen relationGrüneisen relation

| top | pdf |

Grüneisen relationGrüneisen relation

Thermal expansion of a solid is a consequence of the anharmonicityanharmonicity of interatomic forces (see also Section PhononsG. Eckold2.1.2.8 ). If the potentials were harmonic, the atoms would oscillate (even with large amplitudes) symmetrically about their equilibrium positions and their mean central position would remain unchanged. In order to describe thermal expansion, the anharmonicityanharmonicity is most conveniently accounted for by means of the so-called `quasiharmonic approximationquasiharmonic approximation', assuming the lattice vibration frequencies ω to be independent of temperature but dependent on volume $[[(\partial \omega/\partial V) \neq 0]]$ . Anharmonicityanharmonicity is taken into account by letting the crystal expand, but it is assumed that the atoms vibrate about their new equilibrium positions harmonically, i.e. lattice dynamics are still treated in the harmonic approximation. The assumption $[(\partial \omega/\partial V) = 0]$ , which is made for the harmonic oscillator, is a generalization of the postulate that the frequency of a harmonic oscillator does not depend on the amplitude of vibration.

This approach leads, as demonstrated below, to the Grüneisen relation, which combines thermal expansion with other material constants and, additionally, gives an approximate description of the temperature dependence of thermal expansion (cf. Krishnan et al., 1979; Barron, 1998).

For isotropic media, the volume expansion $[\beta]$ $[[= 3\alpha]$ $[ = \alpha_{11} + \alpha_{22} + \alpha_{33}]]$ , cf. (1.4.1.2), can be expressed by the thermodynamic relation $[\beta = {1 \over V} \left({\partial V \over \partial T}\right)_{p} = -{1 \over V} \left({\partial V \over \partial p}\right)_{T} \left({\partial p \over \partial T}\right)_{V} = \kappa \left({\partial p \over \partial T}\right)_{V}, \eqno(1.4.2.1)]$ κ being the isothermal compressibilitycompressibilityvolume. To obtain the quantity $[(\partial p/\partial T)_{V}]$ , the pressure p is deduced from the free energy F, whose differential is $[\hbox{d}F = -S\,\,\hbox{d}T - p\,\,\hbox{d}V]$ , i.e. from $[p = -(\partial F/\partial V)_{T}. \eqno(1.4.2.2)]$ In a crystal consisting of N unit cells with p atoms in each unit cell, there are 3p normal modes with frequencies $[\omega_{s}]$ (denoted by an index s running from 1 to 3p) and with N allowed wavevectors $[{\bf q}_{t}]$ (denoted by an index t running from 1 to N). Each normal mode $[\omega_{s}({\bf q}_{t})]$ contributes to the free energy by the amount $[f_{s,t} = {\hbar \over 2} \omega_{s} ({\bf q}_{t}) + kT \ln \left[1 - \exp \left(-{\hbar \omega_{s} ({\bf q}_{t}) \over kT}\right)\right]. \eqno(1.4.2.3)]$ The total free energy amounts, therefore, to $[\openup6pt\eqalignno{F &= \sum\limits_{s = 1}^{3p} \sum\limits_{t = 1}^{N} f_{s,t}&\cr &= \sum\limits_{s = 1}^{3p} \sum\limits_{t = 1}^{N} \left\{{\hbar \over 2} \omega_{s} ({\bf q}_{t}) + kT\ln \left[1 - \exp \left(-{\hbar \omega_{s} ({\bf q}_{t}) \over kT}\right)\right]\right\}.&(1.4.2.4)\cr}]$ From (1.4.2.2) $[\openup6pt\eqalignno{p &= - \left({\partial F \over \partial V}\right)_{T}&\cr &= - \sum\limits_{s = 1}^{3p} \sum\limits_{t = 1}^{N} \left\{{\hbar \over 2} {\partial \omega_{s} \over \partial V} + {\exp (-\hbar \omega_{s}/kT) \hbar (\partial \omega_{s}/\partial V) \over 1 - \exp (-\hbar \omega_{s}/kT)}\right\}.&(1.4.2.5)\cr}]$ The last term can be written as $[{\hbar (\partial \omega_{s}/\partial V) \over \exp (\hbar \omega_{s}/kT) - 1} = \hbar n (\omega_{s} ({\bf q}_{t}), T) {\partial \omega_{s} \over \partial V}, \eqno(1.4.2.6)]$ where $[n(\omega_{s}, T)]$ is the Bose–EinsteinBose–Einstein factor distribution $[n (\omega_{s}, T) = {1 \over \exp (\hbar \omega_{s}/kT) - 1}. \eqno(1.4.2.7)]$

Differentiation of (1.4.2.5) and (1.4.2.6) with respect to temperature at constant volume [see (1.4.2.1)] yields $[\eqalignno{\left({\partial p \over \partial T}\right)_{V} &= - \sum\limits_{s} \sum\limits_{t} \hbar {\partial n (\omega_{s}, T) \over \partial T} {\partial \omega_{s} ({\bf q}_{t}) \over \partial V}&\cr &= - \sum\limits_{s} \sum\limits_{t} c_{s,t}^{V} {1 \over \omega_{s} ({\bf q}_{t})} {\partial \omega_{s} ({\bf q}_{t}) \over \partial V} &(1.4.2.8)\cr}]$ with $[c_{s,t}^{V} = \hbar \omega_{s} ({\bf q}_{t}) {\partial n (\omega_{s}, T) \over \partial T} = k {(\hbar \omega_{s}/kT)^{2} \exp (\hbar \omega_{s}/kT) \over [\exp (\hbar \omega_{s}/kT) - 1]^{2}}. \eqno(1.4.2.9)]$ This quantity, $[c_{s,t}^{V}]$ (the Einstein function), is the well known contribution of the normal mode $[\omega_{s}({\bf q}_{t})]$ to the specific heat (at constant volume): $[c^{V} = \sum\limits_{s} \sum\limits_{t} c_{s,t}^{V} = \sum\limits_{s} \sum\limits_{t} \hbar \omega_{s} ({\bf q}_{t}) {\partial n (\omega_{s}, T) \over \partial T}. \eqno(1.4.2.10)]$ Equation (1.4.2.8) can be simplified by the introduction of an `individual Grüneisen parameterGrüneisen parameter' $[\gamma_{s,t}]$ for each normal mode $[\omega_{s}({\bf q}_{t})]$ : $[\gamma_{s,t} = -{V \over \omega_{s} ({\bf q})_{t}} {\partial \omega_{s} ({\bf q})_{t} \over \partial V} = -{\partial [\ln \omega_{s} ({\bf q}_{t})] \over \partial (\ln V)}. \eqno(1.4.2.11)]$ Equation (1.4.2.8) then reads [with (1.4.2.1)] $[\left({\partial p \over \partial T}\right)_{V} = {1 \over V} \sum\limits_{s} \sum\limits_{t} c_{s,t}^{V} \gamma_{s,t} = {\beta \over \kappa}. \eqno(1.4.2.12)]$ Based on these individual parameters $[\gamma_{s,t}]$ , an average (or overall mode-independent) Grüneisen parameterGrüneisen parameter $[\bar{\gamma}]$ can be defined as $[\bar{\gamma} = {\sum \sum \gamma_{s,t} c_{s,t}^{V} \over \sum \sum c_{s,t}^{V}} = {\sum \sum \gamma_{s,t} c_{s,t}^{V} \over c^{V}}. \eqno(1.4.2.13)]$ In this averaging process, the contribution of each normal mode to $[\bar{\gamma}]$ is weighted in the same way as it contributes to the specific heat $[c^{V}]$ [see (1.4.2.10)]. Equations (1.4.2.12) and (1.4.2.13) lead to the Grüneisen relation $[\beta = \bar{\gamma} {\kappa c^{V} \over V}. \eqno(1.4.2.14)]$ The above derivation was made for isotropic media. For anisotropic media, $[\Delta V/V]$ is replaced by the strainstrain tensor $[u_{kl}]$ and $[\kappa^{-1}]$ is replaced by the stiffness tensor $[c_{ijkl}]$ [cf. Chapter PhononsG. Eckold2.1 and equation PhononsG. Eckold(2.1.2.75) ]. Then the Grüneisen parameterGrüneisen parameter turns out to be a second-rank tensor $[\gamma_{ij}]$ : $[\gamma_{ij} = {V \over c^{V}} c_{ijkl}^{T} \alpha_{kl}. \eqno(1.4.2.15)]$ In the Debye approximationDebye model, the mode frequencies scale linearly with the cut-off frequency $[\omega_{D}]$ . Therefore, with $[\hbar \omega_{D} = kT_{D}]$ , the average isotropic Grüneisen parameterGrüneisen parameter is calculated to be $[\gamma_{D} = -{V \over \omega_{D}} {\partial \omega_{D} \over \partial V} = -{V \over T_{D}} {\partial T_{D} \over \partial V} = -{\partial (\ln T_{D}) \over \partial (\ln V)}.]$ Since, in the Debye theory, $[T_{D}]$ is independent of temperature, $[\gamma_{D}]$ turns out to be independent of temperature. As κ and V are only weakly temperature dependent, the thermal expansion β should then, according to (1.4.2.14), roughly behave like $[c^{V}]$ , i.e. β should be proportional to $[T^{3}]$ at very low temperatures, and should be approximately constant for $[T \gg T_{D}]$ (the Dulong–Petit law). This behaviour is found to be approximately satisfied for many compounds, even with different types of interatomic interaction, and γ takes values roughly between 1 and 2. Even in the case of crystals with highly anisotropic elastic and thermal behaviour, the three principal values of the tensor $[\gamma_{ij}]$ [(1.4.2.15)] are comparably uniform, having values of about 2 (Küppers, 1974).

Effectively, γ shows a certain more or less pronounced dependence on temperature. The individual $[\gamma_{s,t}]$ are assumed to be temperature independent. However, being an average over the whole spectrum of excited modes [cf. (1.4.2.13)], $[\bar{\gamma}]$ will not necessarily have the same value at low temperatures (when only low frequencies are excited) as at high temperatures (when all modes are excited). Two limiting cases can be considered:

(1) At very high temperatures, all normal modes contribute by an equal amount and the overall $[\bar{\gamma}]$ becomes simply the mean value of all $[\gamma_{s,t}]$ . $[\gamma_{\infty} = {1 \over 3pN} \sum\limits_{s}^{3p} \sum\limits_{t}^{N} \gamma_{s,t}.]$
(2) At very low temperatures, only the lower frequencies contribute. If only the acoustic branchesacoustic branchesacoustic branches are considered, $[\bar{\gamma}]$ can be related to the velocities of elastic waves. In the long-wavelength limit, dispersion is neglected, i.e. $[|{\bf q}|]$ is proportional to ω: $[|{\bf q}_{t}| = {\omega_{s} ({\bf q}_{t}) \over v_{s} (\varphi, \vartheta)}, \eqno(1.4.2.16)]$ where $[v_{s}(\varphi, \vartheta)]$ describes the velocities of the three elastic waves propagating in a direction $[(\varphi, \vartheta)]$ . The density of vibrational states for each acoustic branch in reciprocal space increases with $[q^{2}\ \hbox{d}q]$ . From (1.4.2.16), it follows that the number of normal modes in an increment of solid angle in q space, $[\hbox{d}\Omega = \sin \vartheta\ \hbox{d}\vartheta\ \hbox{d}\varphi]$ , within a frequency interval ω to $[\omega + \hbox{d}\omega]$ , is proportional to $[(\omega^{2}\ \hbox{d}\omega\ \hbox{d}\Omega)/v^{3}]$ . The summation over t can be converted into an integration over ω and Ω, leading to $[\gamma_{0} = {\displaystyle\sum\nolimits_{s=1}^{3} \displaystyle{\int{\gamma_{s} (\vartheta, \varphi)\ \hbox{d}\Omega \over v_{s}^{3} (\vartheta, \varphi)}} \over \displaystyle\sum\nolimits_{s=1}^{3} \displaystyle{\int {\hbox{d}\Omega \over v^{3} (\vartheta, \varphi)}}}.]$ The $[v_{s} (\varphi, \vartheta)]$ can be calculated if the elastic constants are known. For isotropic solids, the term $[\sum v_{s}^{-3}]$ can be replaced (as done in Debye's theory of heat capacity) by $[(v_{l}^{-3} + 2v_{\rm tr}^{-3})]$ , with $[v_{l}]$ being the velocity of the longitudinal wave and $[v_{\rm tr}]$ the velocity of the transverse waves.

In metals, the conduction electrons and magnetic interactions yield contributions to the free energy and to the specific heat. Accordingly, expression (1.4.2.14) can be augmented by introduction of an `electronic Grüneisen parameterGrüneisen parameter', $[\gamma_{e}]$ , and a `magnetic Grüneisen parameter', $[\gamma_{m}]$ , in addition to the `lattice Grüneisen parameter', $[\gamma_{l}]$ , considered so far: $[\beta = {\kappa \over V} (\gamma_{l}c_{l}^{V} + \gamma_{e}c_{e}^{V} + \gamma_{m}c_{m}^{V}).]$

1.4.3. Experimental methods

| top | pdf |

Experimental methods

1.4.3.1. General remarks

| top | pdf |

General remarks

Although the strain tensorstrain tensor $[u_{ij}]$ and the thermal expansion tensor $[\alpha_{ij}]$ in general contain components with $[i \neq j]$ (shear strainsshear strain), in practice only longitudinal effects, i.e. relative length changes $[\Delta l/l]$ with temperature changes ΔT, are measured along different directions and the results are later transformed to a common coordinate system. Diffraction methods directly yield this ratio $[\Delta l/l]$ . Other measuring techniques require separate measurements of Δl and l. The error in the measurement of l can usually be neglected. Thus, the accuracies of Δl and ΔT limit the accuracy of thermal expansion coefficients. The temperature interval ΔT is determined by two measurements of temperatures $[T_{2} \,\gt \,T_{1}]$ , with $[T_{2} - T_{1} = \Delta T]$ . To increase the accuracy of the difference ΔT, this interval should be large. The measured thermal expansion $[\Delta l/(l\Delta T)]$ is usually assigned to a temperature at the midpoint of the temperature interval, $[T_{0} = (T_{2} - T_{1})/2]$ . This procedure is only justified if thermal expansion does not depend on temperature.

Since, in fact, thermal expansion depends on temperature, in principle, smaller intervals should be chosen, which, in turn, enlarge the error of ΔT. Here, a compromise has to be made. Sometimes, after completion of a first run and after reviewing the preliminary course of $[\alpha (T)]$ , it is necessary to repeat some measurements using smaller temperature intervals in temperature ranges with large curvatures.

The more-or-less curved course of $[\alpha_{ij}(T)]$ is usually fitted by polynomials in powers of temperature. Here, those T terms should be selected that are physically meaningful in the particular temperature range. For the low-temperature behaviour of a metal, a polynomial of type $[\alpha = AT + BT^{3} + CT^{5}]$ should be chosen. For minerals at higher temperatures, a polynomial $[\alpha = \alpha_{0} + AT + BT^{-1} + CT^{-2}]$ is used (Saxena & Shen, 1992).

Temperature is usually measured by thermocouples and, in the cases of optical or electrical measurements (Sections 1.4.3.3 and 1.4.3.4) and at low temperatures also by platinum resistance thermometers. Above 1100 K, optical pyrometers can be used.

In order to measure the thermal expansion of a crystal, at least as many independent measurements are necessary as the tensor has independent components (fourth column in Table 1.4.1.1). It is advisable, however, to carry out more measurements than are necessary. In this case (of redundancy), a `best' set of tensor components is to be determined by least-squares methods as described below.

Let us assume the most general case of a triclinic crystal, where $[m \;\gt\; 6]$ independent measurements of thermal expansions $[b_{k}]$ $[(k = 1, \ldots, m)]$ were performed along m different directions with direction cosines $[(\alpha_{1j})_{k}]$ with respect to the chosen coordinate system. Each measurement $[b_{k}]$ is related to the six unknown tensor components $[\alpha_{ij}]$ (to be determined) by $[b_{k} = (\alpha'_{11})_{k} = (\alpha_{1i})_{k} (\alpha_{1j})_{k} \alpha_{ij}. \eqno(1.4.3.1) ]$ If the $[\alpha_{ij}]$ are replaced by $[\alpha_{\gamma}]$ $[(\gamma = 1, \ldots, 6)]$ , using Voigt's one-index notation (Section Introduction to the properties of tensorsA. Authier1.1.4.10.2 ), then $[b_{k} = C_{k\gamma} \alpha_{\gamma}]$ represents an overdetermined inhomogeneous system of m linear equations for the six unknowns $[\alpha_{\gamma}]$ . The coefficients $[C_{k\gamma}]$ , forming an $[m \times 6]$ matrix, are products containing direction cosines according to (1.4.3.1). The solution is obtained after several matrix calculations which are indicated by the formula (Nye, 1985) $[\displaylines{\alpha_{\gamma} = \left\{\left[(C_{l\delta}^{t} \cdot C_{l\varepsilon})^{-1}\right]_{\gamma \eta} C_{k\eta}^{t}\right\} b_{k}\cr (\gamma, \delta, \varepsilon, \eta = 1, \ldots, 6;\ \ l, k = 1, \ldots, m),\cr}]$ where a superscript `t' means transposed.

Instead of determining the tensor components of a triclinic or monoclinic crystal in a direct way, as outlined above, it is also possible to determine first the temperature change of the crystallographic unit cell and then, by formulae given e.g. by Schlenker et al. (1978), to deduce the tensor components $[\alpha_{ij}]$ . The direct approach is recommended, however, for reasons of the propagation of errors (Jessen & Küppers, 1991).

The experimental techniques of measuring relative length changes $[\Delta l/l]$ that are most widely used include diffraction, optical interferometry, pushrod dilatometrypushrod dilatometry and electrical capacitancecapacitance method methods. If the specimens available are very small and/or irregular in shape, only diffraction methods can be used. The other methods require single-crystal parallelepipedal samples with at least 5 mm side lengths.

1.4.3.2. Diffraction

| top | pdf |

Diffraction

Thermal expansion expresses itself, on a microscopic scale, by a change of the interplanar spacings of lattice planes. These can be measured by use of diffraction methods from changes of Bragg angles $[\theta]$ . Differentiation of the Bragg equation $[2d \sin \theta = \lambda]$ , giving $[\Delta d/d = - \cot \theta \Delta \theta]$ , yields the thermal expansions $[\alpha'_{11}]$ in directions normal to lattice planes (hkl) (i.e. along $[{\bf h} = h{\bf a}^{*} + k{\bf b}^{*} + l{\bf c}^{*}]$ ) and, if h has direction cosines $[a_{1j}^{(hkl)}]$ with respect to the chosen Cartesian coordinateCartesian coordinates system, $[\alpha_{11}'^{(hkl)} = a_{1i}^{(hkl)} a_{1j}^{(hkl)} \alpha_{ij} = {1 \over d^{(hkl)}} {\partial d^{(hkl)} \over \partial T} = - \cot \theta {\partial \theta \over \partial T}.]$ The coefficient $[\cot\theta]$ permits a tremendous increase of sensitivity and accuracy if $[\theta \rightarrow 90^{\circ}]$ . That means, if possible, high-angle $[(\theta \;\gt\; 70^{\circ})]$ reflections should be used for measurement because, for a given Δd, the changes of Bragg angles $[|\Delta \theta|]$ to be measured increase with $[(\cot \theta)^{-1} = \tan \theta]$ .

The most important diffraction techniques (X-radiation is preferentially used) are: the rotating-crystal method, the Weissenberg method and diffractometers with counter recording. If small single crystals ( $[\gt]$ approximately 50 µm) are not available, powder methods (using a Debye–Scherrer film camera or powder diffractometer) must be used, although the advantage of the highly accurate back-reflections, in general, cannot be used.

Experimental aspects of measuring absolute d-values are discussed in detail in Volume C of International Tables for Crystallography (2004), Part IntroductionA. J. C. Wilson5 . Since only relative displacements are to be measured in the present case, many complications connected with the determination of absolute values do not apply for thermal expansion measurements, such as zero-point correction, eccentricity of the mounted sample, refraction, absorption and diffraction profile.

1.4.3.3. Optical methods (interferometry)interferometry

| top | pdf |

Optical methods (interferometry)interferometry

The basic principle of measuring thermal expansion by interferometry consists of converting sample-length changes into variations of optical path differences of two coherent monochromatic light beams, which are reflected from two opposite end faces of the sample (or planes corresponding to them). An He–Ne laser usually serves as a light source. A beam expander produces a parallel beam and interference by two planes, which are slightly inclined to each other, produces fringes of equal thickness. Thermal expansion causes a movement of this fringe pattern, which is detected by photodiodes. The number of fringes passing a reference mark is counted and gives a measure of the relative movement of the two planes.

As examples for various realizations of interferometric devices (Hahn, 1998), two basic designs will be described.

(i) Fizeau interferometerinterferometersFizeauFizeau interferometer (Fig. 1.4.3.1). The sample S is covered by a thin plate $[P_{2}]$ (with a polished upper surface and a coarsely ground and non-reflecting lower surface) and is placed in between a bottom plate $[P_{3}]$ and a wedge-shaped plate $[P_{1}]$ (wedge angle of about $[1^{\circ}]$ ). The upper surface of $[P_{1}]$ reflects the incident beam (i) to a reflected beam (r) so that it is removed from the interference process. The relevant interference takes place between ray (1) reflected by the lower surface of $[P_{1}]$ and ray (2) reflected by the upper surface of $[P_{2}]$ . A cylindrical tube T, which defines the distance between $[P_{1}]$ and $[P_{3}]$ as well as $[P_{2}]$ , is usually made of fused silica, a material of low and well known thermal expansion. The measured dilatation is caused, therefore, by the difference between thermal expansion of the sample and a portion of the fused silica tube of equal length. The whole apparatus is mounted in a thermostat.

(ii) Michelson interferometerinterferometersMichelsonMichelson interferometer (Fig. 1.4.3.2). The reference mirror M and the beam-splitter B are placed outside the thermostat. The upper face of the sample S is one interference plane and the upper surface of the bottom plate is the other. The interference pattern IP is divided into two fields corresponding to the two ends of the sample. The difference of fringe movements within these two fields yields the absolute thermal expansion of the sample.

1.4.3.4. Electrical methods

| top | pdf |

Electrical methods

1.4.3.4.1. Inductance changes (pushrod dilatometry)pushrod dilatometry

| top | pdf |

Inductance changes (pushrod dilatometry)pushrod dilatometry

With this method, the expansion of the crystal is transmitted out of the cooled or heated region to an external measuring device by a rod made of a reference material whose thermal expansion is low and well known (usually silica glass) (cf. Gaal, 1998). If this rod is inside a tube of the same material (silica glass), and the specimen is inside as well, then the difference in expansion between the crystal and an equal length of the reference material is measured. Above 1100 K, instead of silica glass, high-purity alumina or single-crystal sapphire or tungsten rods are used.

To measure the displacement of the rods, several techniques are used. The most important are:

(1) a ferrite core is moved in a coil to change the inductivity of the coil, which is detected by the change of resonance frequency of an electrical circuit having a fixed capacitance;

(2) linear-variable-differential transformers.

Temperature gradients in the rod and the tube can lead to severe complications. For every determination, the system should be calibrated by certified materials (White, 1998), such as α-Al₂O₃, Cu, Pt, fused silica, Si, W, Mg or Mo.

1.4.3.4.2. Capacitance methodscapacitance method

| top | pdf |

Capacitance methodscapacitance method

In a way similar to the interferometric methods, the change of the gap between the lower surface of P₁ and the upper surface of P₂ (Fig. 1.4.3.1) is used to determine the thermal expansion of the sample. This gap – with electrically conducting surfaces – is used as the capacitance in an electric circuit with a fixed inductance. The change of capacitance leads to a change of resonance frequency, which is measured.

1.4.4. Relation to crystal structure

| top | pdf |

Relation to crystal structure

The anharmonicitiesanharmonic potentials of the interatomic potentials gain importance with increasing vibration amplitudes of the atoms. Since, at a given temperature, weakly bonded atoms oscillate with larger amplitudes, they contribute to a larger degree to thermal expansion in comparison with stronger bonds. This correlation follows also from the Grüneisen relationGrüneisen relation (1.4.2.14) because α (or β) is proportional to the compressibilitycompressibilityvolume, which, in turn, is a rough measure of the interatomic and intermolecular forces.

This simple consideration allows qualitative predictions of the thermal expansion behaviour of a crystal species if the structure is known:

(1) Covalent bonds are associated with very small thermal expansions (diamonddiamond, graphitegraphite perpendicular to the c axis), whereas van der Waals bonds give rise to large thermal expansions (N₂, graphite parallel to the c axis). In accordance with their relatively high elastic stiffness, hydrogen bonds, especially short hydrogen bonds, lead to comparably small thermal expansions.

(2) In layer-like structures, the maximum thermal expansion occurs normal to the layers (mica, graphite, pentaerythritol).

(3) Thermal expansion decreases when the density of weak bonds decreases: therefore, expansion is greater for crystals with small molecules (many van der Waals contacts per volume) than for their larger homologues (e.g. benzene–naphthalene–anthracene).

Buda et al. (1990) have calculated the thermal expansion of siliconsilicon by means of ab initio methodsab initio calculations. It is to be expected that these methods, which are currently arduous, will be applicable to more complicated structures in the years to come and will gain increasing importance in this field (cf. Lazzeri & de Gironcoli, 1998).

It is observed rather frequently in anisotropic materials that an enhanced expansion occurs along one direction and a contraction (negative expansion) in directions perpendicular to that direction (e.g. in calcitecalcite (CaCO₃)). The volume expansion, i.e. the trace of $[\alpha_{ij}]$ , is usually positive in these cases, however. If the tensor of elastic constants is known, such negative expansions can mostly be explained by a lateral Poisson contraction caused by the large expansion (Küppers, 1974).

Only a few crystals show negative volume expansion and usually only over a narrow temperature range (e.g. Si and fused silica below about 120 K and quartz above 846 K) (White, 1993). Cubic ZrW₂O₈ was recently found to exhibit isotropic negative thermal expansionthermal expansionnegative over the complete range of stability of this material (0.5–1050 K) (Mary et al., 1996). This behaviour is explained by the librational motion of practically rigid polyhedra and a shortening of Zr—O—W bonds by transverse vibration of the oxygen atom. By tailoring the chemical content (of TiO₂ or LiAlSiO₄) in a glassy matrix, an expansion coefficient can be achieved that is nearly zero over a desired temperature range.

A compilation of numerical values of the tensor components of more than 400 important crystals of different symmetry is given by Krishnan et al. (1979).

Phase transitions are accompanied and characterized by discontinuous changes of derivatives of the free energy. Since the thermal expansion β is a second-order derivative, discontinuities or changes of slope in the $[\beta (T)]$ curve are used to detect and to describe phase transitions (cf. Chapter Structural phase transitionsJ.-C. TolédanoV. JanovecV. KopskýJ. F. ScottP. Boček3.1 ).

1.4.5. Glossary

| top | pdf |

Glossary

$[\alpha_{ij}]$	thermal expansion
β	volume thermal expansion
γ	Grüneisen parameter
κ	isothermal compressibility
$[u_{ij}]$	strain tensor
$[c^{V}]$	specific heat at constant volume
F	free energy
p	pressure
S	entropy
T	temperature
V	volume

Figure 1.4.1.1 | top | pdf |

Sections (ac plane) of representation surfaces for a trigonal (or tetragonal or hexagonal) crystal with $[\alpha_{11} = \alpha_{22} = -1]$ and $[\alpha_{33} = +3 \times 10^{-5}\;\hbox{K}^{-1}]$ (similar to calcite). (a) Quadric, (b) strain ellipsoid (greatly exaggerated), (c) polar diagram. The c axis is the axis of revolution. Sectors with negative expansions are dashed.

Sections (ac plane) of representation surfaces for a trigonal (or tetragonal or hexagonal) crystal

Figure 1.4.3.1 | top | pdf |

Schematic diagram of a Fizeau interferometer.

Schematic diagram of a Fizeau interferometer

Figure 1.4.3.2 | top | pdf |

Schematic diagram of a Michelson interferometer.

Schematic diagram of a Michelson interferometer

Table 1.4.1.1| top | pdf |
Shape of the quadric and symmetry restrictions

System	Quadric		No. of independent components	Nonzero components
System	Shape	Direction of principal axes	No. of independent components	Nonzero components
Triclinic	General ellipsoid or hyperboloid	No restrictions	6
Monoclinic		One axis parallel to twofold axis (b)	4
Orthorhombic		Parallel to crystallographic axes	3
Trigonal, tetragonal, hexagonal	Revolution ellipsoid or hyperboloid	c axis is revolution axis	2
Cubic, isotropic media	Sphere	Arbitrary, not defined	1